RCA CD9500 Owners Manual - Page 15

1 2 23 1 CLEAR DISC TRACK MIN SEC MODE CLEAR PROGRAM REPEAT DISPLAY STAND BY POWER OSR SINGLE PLAY ACCESS PLAY CD-FILE 1 2 3 DISC 4 5 6 7 8 9 PUSH ENTER DISC 0 TRACK ASMS/SEARCH RANDOM OPEN/ CLOSE UNLOAD PLAY/PAUSE 6 STOP 7 3 7 56 23 2 7 REPEAT MODE PROGRAM CLEAR 1 2 3 DISPLAY 4 5 6 7 DISC SET 8 9 0 TRACK SET 2 DISC 3 1 SEARCH ¡ 4 ASMS ¢ 7 8 3 RANDOM 8 CLEAR 3 5 (PROGRAM play) • The remote control is the most convenient way to perform this operation. You can also press the button between parentheses as indicated below. • You can program up to 36 steps. Operation example : Programming disc 2, track 7 as step 1, and disc 5, track 3 as step 2. 1 PROGRAM Press PROGRAM during stop mode. DISC TRACK MIN SEC ( PROGRAM ) 2 PGM Use the number buttons to select the disc, then press DISC SET. ( 2 3 ( 7 ) DISC DISC TRACK MIN SEC PGM The PGM indicator starts to blinks. Use the number buttons to select the track, and press TRACK SET. DISC TRACK MIN SEC ) TRACK PGM DISC TRACK MIN SEC PGM 4 5 ( 3 ( DISC ) Repeat Steps 2 and 3 to program additional discs and tracks. Once the track times have been added, the PGM indicator stops blinking and the following display appears (Total Time). DISC TRACK MIN SEC TRACK PGM ) 5 3 Press 3. The program play starts from the track that was programmed first. ( PLAY/PAUSE ) The following operations can only be performed during normal play, HI-LITE scan or PREVIOUS scan. (Direct program) 1. Press PROGRAM to activate program mode. 2. Press PROGRAM during playback to program the current track. (Preprogramming) You can program during normal playback. (\Operation example 1 2 3 4 ) • The changer changes to program play when the current track finishes playing. • To change to program mode directly, press 3. The following operations can only be performed during stop mode. (Disc all program) If you skip Step 3 of the operation example, disc 2 is programmed as Step 1 . 15