RCA CD9500 Owners Manual - Page 16
No Disc
UPC - 040293149680
View all RCA CD9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
HI-LITE POWER HI-LITE PREVIOUS BEST REPEAT MODE PROGRAM CLEAR 1 2 3 DISPLAY 4 5 6 7 DISC SET 8 9 0 TRACK SET 2 DISC 3 1 SEARCH ¡ 4 ASMS ¢ 7 8 3 RANDOM 3 (Pause program) If you press 8 at Step 4 , you can program a pause. When you press 8, PA appears in the display instead of the disc number. • For example, when making a program for recording both sides of a cassette tape, press 8 to insert a pause after programming the tracks for one side. After turning the tape over, press 8 to resume recording. Notes: • You cannot program a pause as the first step, nor program two pauses in a row. • When you program a pause, it counts as one step and reduces the total number of tracks you can program. • To erase a program... Press 7 twice during playback (or once in stop mode). You can also erase the program by pressing MODE, RANDOM, PREVIOUS, or SINGLE LOADER PLAY in either play or stop mode (or by pressing BEST in stop mode). • To cancel a program step In stop mode, each time you press CLEAR, the last step in the program is erased. • If a programmed disc is missing or inserted backwards during program play, NO DISC appears in the display, the step is automatically erased, and playback proceeds to the next step. • Program contents are stored in memory even when the power is turned off. • Press DISPLAY twice to check the number of steps that have been programmed. DISC TRACK MIN SEC (HI-LITE scan) • The operation is available only from the remote control. This function plays a 10 second portion located 1 minute from the start of each track on all the discs in the current play mode. HI-LITE Press once Press HI-LITE during either play or stop mode. • The changer plays a 10 second portion located 1 minute into the first track of each CD, starting from the first CD. The DISC and SCAN indicator blinks. HI-LITE Press twice Press HI-LITE twice during either play or stop mode. • The changer plays a 10 second portion located 1 minute into each track of each CD, starting from the first CD. The SCAN indicator blinks. HI-LITE Press once Press HI-LITE during program mode. • The changer plays a 10 second portion located 1 minute into each track in the program. The SCAN indicator blinks. PGM This Indicates the Number of Programmed Steps. Notes: • If Step 5 is carried out before the accumulated time is displayed, the program play starts and the time is not displayed. • When UNLOAD is pressed while a program has been entered, the disc for the 1st program step comes on the center position and the hood opens. • The display is not shown if the total time of the program is 100 minutes or more. 16 HI-LITE Press HI-LITE during best selection memory playback. • The changer plays a 10 second portion located 1 Press once minute into each track in the best selection memory. The SCAN indicator blinks.