RCA CD9500 Owners Manual - Page 18
Troubleshooting
UPC - 040293149680
View all RCA CD9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
TROUBLESHOOTING This CD changer has been manufactured to the specifications of RadioShack and is covered by a limited warranty from RadioShack. If your CD changer is not operating as it should, take it to your local RadioShack store or call 1-800-THE-SHACK for assistance. Your CD changer should give you years of trouble-free service. However, if you do have problems, these suggestions might help. Symptom No sound When playback is started, it stops immediately. Pauses or stops during playback. Remote control will not function. Cause • Output cables are connected incorrectly or loosely. • Incorrect operation of stereo amplifier. • Pin plugs and/or amplifier terminals are dirty. • Changer is in pause mode. • The disc is loaded with the label side facing left. • Disc is inserted incorrectly. • Smudges or debris on the disc. • Dead batteries. • Obstruction between the changer and the remote control. Remedy • Connect properly. • Check the settings of the amplifier switches and sound volume controls. • Clean away dirt. • Press 3 or 8. • Reload the disc with the label side facing right. • Insert the disc correctly with the label side facing right. • Clean the disc. • Replace the batteries. • Relocate the remote control or remove the obstruction. SELF-DIAGNOSTICS FUNCTION Your CD changer has a self-diagnostic function. When the CD changer detects an abnormal condition, it displays an error number on the display. If this happens, try the suggestion indicated. If the error number still appears, take the CD changer to your local RadioShack store for assistance. Display on the changer DISC TRACK MIN SEC Service No. Service No. U1 U2 U3 Unit Status The disc may not be loaded properly in the rack. There is an operation error in the mechanical section. There is an error related to the hood. Suggestions • Reload the discs properly. (Insert only one disc in a slot.) • Check for foreign matter on the disc. • Check for foreign matter in the rack. • Check for foreign matter in the rack. • Unplug the power cord then plug it in again. • Check the hood for clearance and obstructions. • Unplug the power cord then plug it in again. If the same display reappears, there might be an error in the mechanical section. When requesting servicing, please note the service number displayed on the changer. 18