RCA DRC6272 DRC6272 Product Manual - Page 19

Additional Information Troubleshooting The unit does not switch on. • Make sure it is plugged in. • Turn on the unit. EN The device switches off spontaneously. • The device switches off automatically when it is in STOP mode for more than 30 minutes without any user intervention. Switch it on again. • It might be impossible to read the disc. • Insert the disc with the printed side facing up. • Make sure disc can actually be played by this device. • Make sure disc's regional code matches the unit's regional code. This unit's regional code is 1. • Clean the disc. There is no picture. • Make sure you have switched on the TV set. • Check the connections. • Select the AV input/output assigned to unit on the TV. The picture is of poor quality (with snow or lines). • Check the connections. There is no sound or the sound is of poor quality. • Check the connections. I can't find my file in the JPEG listing. • Make sure the filename is valid. The remote control does not work or works only intermittently. • Make sure batteries are inserted or change them. • Aim the remote control at the unit. The infrared beam must not be blocked or interrupted. • Make sure the remote control is configured to control the device you are trying to operate with it. The subtitles do not appear. • Make sure the DVD provides subtitles. • Refer to the section on how to display subtitles. The disc menu language is not the correct one. • The disc menu language has not been set up. • The language of your choice is not available on the disc. 18