RCA DRC8005N User Guide - Page 58

Chapter 6: Additional Information VCR OUT TO TV IN FROM ANTENNA INPUT OUTPUT L R From Cable Line or Off-air antenna DVD Recorder RF ANTENNA/CABLE INPUT INPUT VIDEO L AUDIO S-VIDEO IN R S-VIDEO OUT OUTPUT VIDEO L AUDIO R COMPONENT VIDEO OUTPUT Y DIGITAL AUDIO OUT Pb COAXIAL Pr OPTICAL PROG. SCAN OFF ON IN FROM CABLE/ANTENNA TV INPUT L R Copying content from a VCR videocassette to a DVD+R or DVD+RW disc The following instructions are provided for a general connection in case you want to copy your VCR videocassettes to disc. The back of your TV and VCR probably don't exactly match the ones shown here. In general, you just need to connect the VCR's Output Jacks to the DVD Recorder's Input Jacks. Also, you need to be able to see what your copying, so the TV needs to be connected. 1. Connect the DVD Recorder to the VCR. Connect a set of audio/video cables to the DVD Recorder's INPUT VIDEO (yellow), AUDIO L (white), and AUDIO R (red) jacks, to the VCR's OUTPUT Jacks (sometimes labeled OUTPUT VIDEO and AUDIO L and R). 2. Connect the DVD Recorder to the TV. Connect a set of audio/video cables to the DVD Recorder's OUTPUT VIDEO (yellow), AUDIO L (white), and AUDIO R (red) jacks, to the TV's INPUT Jacks (sometimes labeled INPUT VIDEO, L and R). 3. Connect the signal from your cable or off-air antenna to the 2 Way Splitter (provided)- the end with one connector. 4. Use the RF Coaxial Cable (provided) to connect the 2 Way Splitter to the DVD Recorder's RF ANTENNA/CABLE INPUT jack. 5. Connect another RF Coaxial Cable (not provided) to the other connector on the 2 Way Splitter. Connect the other end of this cable to the TV's RF Input jack (sometimes labeled IN FROM CABLE/ANTENNA). 6. Turn on all of the components. 7. Tune the TV to the Video Input Channel that corresponds with the Audio/Video Input jacks you used to connect it to the DVD Recorder. 8. Insert the videocassette you want to record onto disc into the VCR, and cue it up. 9. Tune the DVD Recorder to its Video Input Channel (press the DVD button and then the INPUT button on the DVD Recorder's remote control). 10. Put a DVD+R or DVD+RW disc into the DVD Recorder, and press RECORD. 11. Press PLAY on the VCR. 12. When you're finished recording, press STOP on the DVD Recorder and tune the TV to its Video Input Channel so it displays content playing in the DVD Recorder. 13. Make sure the content copied by playing the disc.