RCA RS2047 User Manual - RS2047 - Page 4

RS2047EN 3/1/06 1:53 PM Page 8 Getting Started EN Unpacking the system You should have the following: • one main unit (with 2 main speakers); • one remote control; • one AM loop antenna; • one user's guide; • one safety leaflet; • owner registration Card. Unit Back Connections 12 3 4 Connecting the Speakers Each speaker has a black (negative) and a red (positive) jack. When connecting the speakers, match the red wires to the red jacks and the black wires to the black jacks. Speaker Wire Connection Push Speaker terminal tab down to insert wire. Release tab to lock wire in the terminal. NOTE: Make sure the insulation is completely removed from the ends of the speaker wires at all connection points. Installation To ensure sufficient ventilation, keep the spacings shown below free from other surfaces: 1. AM Loop antenna Jacks. 2. FM Pigtail Antenna. 3. AUX IN 4. Main Speaker Jacks. Using the FM and AM Antennas Before you use your audio system, you'll want to make sure both the FM and AM antennas are positioned properly. Uncoil the FM antenna at the back of the unit, making sure it is fully extended (you may even want to tape it to the wall behind the unit if possible. The higher the better.) You'll also need to connect the AM antenna loop to the back of the unit if you listen to AM stations. Rotate the AM loop antenna for better reception. 4" 4" Front View 4" 4" 2" Side View 2 General Controls Refer to the actual unit or remote control DELETE - deletes programs; removes files from while you are reading below descriptions. USB device. EN Some keys may have extra functions in BACK - navigates backward during file specific operation. navigation. Front View ON/STANDBY - turns power on or off (STANDBY mode). In STANDBY mode, press to turn the system on in the previously used mode. CD INFO - selects display information (such as elapsed playback time) of currently playing CD, ID3 tag of mp3/WMA files and memory usage in USB mode. BAND - selects tuner bands; enters auto preset program in FM mode. (skip backward) - goes to the previous track or file (CD and USB modes); selects the previous program location; tunes down radio frequency; selects the previous radio preset station and decreases hour and minute digit in clock setting. (skip forward) - goes to the next track or file (CD and USB modes); selects the next program location; tunes up radio frequency; selects the next radio preset station and increases hour and minute digit in clock setting. (play/pause) - plays and pauses playback. (stop) - stops playback or recording; returns to the first track on a mp3/WMA disc; selects tune or preset mode when listening to the radio. SOURCE - selects among CD player, tuner, USB and AUX modes. Look at the display icons to identify the current mode. DEMO - turns the feature demonstration on or off. OPEN/CLOSE - opens or closes the disc tray. DISC 1 - 5 - select corresponding disc tray. Top View - VOLUME + - adjusts volume; navigates through folders and files in navigation mode. PHONES - jack for connecting headphones CD REC - starts and stops CD to USB recording. SELECT - enters navigation mode in CD and USB mode. Remote Control ON/STANDBY, SOURCE, CD INFO, BAND, OPEN/CLOSE, , , , - same function as the corresponding key on the main unit. (navigation keys) - move in indicated direction during file navigation. Refer to "Track and Files Navigation" for details. B.BOOST - turns on or off Bass Boost. FM ST - selects between stereo and mono sound in FM tuner mode. EQ - selects equalizer presets. - cuts and restores audio output. VOL or - decreases or increases volume. DISC SKIP - skips to next disc tray. PROG - enters program mode for CD, USB and tuner modes; applies new settings for clock and timer; confirms editing name in file renaming. INTRO - turns intro mode on or off to play the first 10 seconds of each track in CD and USB modes. CLOCK - enters clock setting mode; shows clock time. ADD - selects tracks or files into program. - turns on/off random listening in CD and USB modes. TIMER - enters timer setting mode; turns timer on/ off. DEL - deletes programs; removes files from USB device. REPEAT - selects repeat mode. SLEEP - selects the time interval in minutes before the unit turns off. Installing Batteries The remote control must be inserted with 2 "AAA" or "UM-4" or "R03" batteries prior to use. 3