RCA RS2047 User Manual - RS2047 - Page 9

RS2047EN 3/1/06 1:53 PM Page 18 Radio EN Basic Listening Refer to "Quick Start" for basic listening operations. Auto Preset Programming (FM only) Press and hold BAND for 2 seconds to scan stations in FM band. The stations will then be stored as preset channels. A maximum of 32 stations can be stored. Beware of your preset channels being erased accidentally because the scanning and storing process is automatic upon pressing the button. You can stop the automatic scan by pressing any button, but the erased stations cannot be recovered. Using Presets The tuner can be in either TUNE or PRESET mode. When in PRESET mode, the PROG light is on. 1. Press until you see "PROG" icon appear on the display to enter preset mode. 2. Press or on the main unit or (navigation keys) on the remote control to access the previous or next preset station. The display first shows the preset program number and after a few seconds, the frequency will be displayed. (P:22 is preset 22) Manually Setting Presets 1. Press until you see "PROG" icon disappear from the display to enter tuning mode. 2. Press or to access the desired frequency. 3. Press PROG once on the remote control. 4. The most recently accessed program location will be displayed. If a different program location is preferred, press (navigation keys) on the remote control (or or on the main unit) to a select a desired preset number (1-32). 5. Press PROG to store the selected frequency at that preset. Troubleshooting Tips Problem Solution Problem Solution EN System will not turn on • Check power cord for a secure connection. • Unplug the unit for a moment, and then plug into power source again. • Check the outlet by plugging in another device. No sound • Increase the volume setting. • Check connection to speakers. • Check that you have selected the appropriate function: CD, Tuner. • Make sure mute is off. • Make sure headphones are not plugged in. Poor radio reception • Check antenna connection. • Move antenna. • Turn off nearby electrical appliances, such as hair dryer, vacuum cleaner, microwave, fluorescent lights. CD does not play • Check that CD is in the tray. • Check that CD label is facing up. • Check that PAUSE mode is not on. • Check that CD function is selected. • Use CD lens cleaner. • Clean the disc. • Try another CD. CD sound skips • Clean the disc. • Check disc for warping, scratches, or other damage. • Check if something is causing the system to vibrate. If so, move the system. • Make sure the speakers are at least 3 feet away or on a different surface from the main unit. CD button will not respond, or does not change discs when you press DISC SKIP • Switch to another function (Tuner) and then back to CD. Remote control does not work • Check that the batteries are properly installed. • Replace weak batteries. • Check the system is plugged into power source. • Point the remote directly at the system's front panel. • Move closer to the system. • Remove any obstacles between the remote and the system. 12 13