RCA RS2056 User Manual - RS2056 - Page 11

RS2056 EN 6/9/06 9:58 AM Page 22 Radio EN Selecting Tuner Band 1. Press SOURCE to enter Tuner mode. 2. Press BAND to select between FM or AM Radio band. Tips: Your audio system has 32 preset stations. Auto Preset Programming (FM only) Press and hold the BAND button for 2 seconds to scan stations in FM band. The stations will then be stored as preset channels. A maximum of 32 stations can be stored. Beware of your preset channels being erased accidentally because the scanning and storing process is automatic upon pressing the button. You can stop the automatic scan by pressing any button, but the erased stations cannot be recovered. Tuning to a Station Press or to select frequencies. Press and hold or to scan frequecies. Auto Prog 87.50MHz Using Presets The tuner can be in either TUNE or PRESET mode. • Press to toggle TUNE and PRESET mode. • Press or to access the previous or next preset station. Manually Setting Presets 1. Press to enter TUNE mode. 2. Press or to access the desired frequency. 3. Press the PROG button once and the most recently accessed program location flashes on the display. Preset 01 87.50MHz Preset 02 90.50MHz Tips: Under PRESET mode, press or can only access the preset stations. Manually tuning is not accessible in this mode. 4. If a different program location is preferred, press or to move to the desired preset number (1-32). 5. Press PROG to store the selected frequency at that preset. Suppressing Stereo Signal Press FM ST to toggle between FM mono and stereo mode. (Remote Only) "STEREO" is displayed in stereo mode. 15 Recording to mp3 Player You can record CD, Tuner or AUX files to the mp3 Example (Record one CD): EN player. In CD stop mode or CD pause mode, press Recording CD to mp3 Player Normal/High Speed Recording 1. Connect the mp3 player to the USB port, "USB RECORD. Select Normal/High speed using , or , then press SELECT and DISC 1 to DISC 5 to start recording the corresponding disc. Connected" will show on the display. 2. In CD stop mode or navigation mode, press RECORD. Example (Record all 5 CDs): 3. Press , , or to select Normal or In CD stop mode or CD pause mode, press High Speed. RECORD. Select Normal/High speed using , or , then press SELECT and to start Rec. Speed recording (Make sure "All Disc" mode is selected). Normal Example (Record only selected tracks > High from a CD): Note: High speed recording mode can save time when recording from CDs. It is normal that the pitch is increased during high speed recording. 4. Press SELECT to confirm selection. The unit will enter recording standby mode. This is indicated by the RECORD icon flashes on the display. 5. Press to start playback and recording will begin. This is indicated by the RECORD icon on the display. 6. Press to stop recording. 1. Create a CD program by following instructions under "Setting Up a Program List" on page 18. 2. In CD stop mode or CD pause mode, press RECORD. Select Normal/High speed using , , or , then press SELECT. 3. Press PROG and then to enter program playback mode. Playback and recording begins automatically. The PROGRAM and RECORD icons light on the display. 4. Press to stop recording. Tips: Tips: To view elapsed recording time and remaining time, press BAND/INFO on the main unit or INFO on the remote in normal speed recording mode. Elapsed recording time 0:22 146:14 Remaining Time If CD playback is already started, recording will begin instanly when RECORD is pressed. If CD playback is stopped, select Normal/ High Speed using , , or , then press SELECT and to start recording. Recording will not start until CD starts playback. 16