RCA RS2056 User Manual - RS2056 - Page 5

RS2056 EN 6/9/06 9:58 AM Page 10 Getting Started EN Content of Box • one main unit (with 2 main speakers); • one remote control; • one AM loop antennas; • one mp3 Player; • one pair of earphones • one user manual; • one safety leaflet; • Owner registration Card. ! Warning: Use of this product is for your personal use only. Unauthorized recording or duplication of copyrighted material may infringe upon the rights of third parties and may be contrary to copyright laws. Note: Make sure the tracks are encoded in mp3 or Windows Media formats and supported bitrates. Bitrates supported by the player: mp3 - 32 to 320kbps wma - 48 to 160kbps Connections of Antennas and Speakers 13 2 4 1. AM Loop antenna Jacks. 2. AUX IN. 3. FM Pigtail Antenna. 4. Main Speaker Jacks. Getting Started Using the FM and AM Antennas Before you use your audio system, you'll want to make sure both the FM and AM antennas are positioned properly. Uncoil the FM antenna at Installation EN To ensure sufficient ventilation, keep the spacings shown below free from other surfaces: the back of the unit, making sure it is fully extended (you may even want to tape it to the wall behind the unit if possible. The higher the 4" better.) You'll also need to connect the AM antenna loop to the back of the unit if you listen to AM stations. Rotate the AM loop antenna for better reception. 4" Front View 4" Connecting the Speakers Each speaker has a black (negative) and a red (positive) jack. When connecting the speakers, match the red wires to the red jacks and the black wires to the black jacks. Speaker Wire Connection 4" 2" Side View Push Speaker terminal tab down to insert wire. Release tab to lock wire in the terminal. NOTE: Make sure the insulation is completely removed from the ends of the speaker wires at all connection points. 3 4