RCA RS2056 User Manual - RS2056 - Page 8

RS2056 EN 6/9/06 9:58 AM Page 16 Settings EN Setting the Timer You can turn on/off the unit or record TUNER at preset times by setting the timer. 1. Press and hold TIMER on the remote control until Timer On and the clock hour flashes on the display. Timer On 00:00A 6. Press TIMER to set volume. Adjust VOLUME CONTROL to select desired volume level. Timer Volume 10 7. Press TIMER to save settings. Press TUNE MODE to quit setting. The timer is automatically activated once timer setting is saved 2. For setting time, press or to set the hour and then press TIMER to shift to minute digits. 3. Press or to set the minute. 4. Press TIMER to change to Timer Off setting with clock time flashing. Repeat steps 2 & 3 for timer off time setting. Timer On 00:00A Off 00:00P Tips: "TUNER REC" settings are for Program Recording. For more information, see paragraph below. Activating the Timer Press and release TIMER to turn on/off the alarm. The timer icon is displayed when timer is activated. 5. Press TIMER to select source. Press or to select TUNER / TUNER REC / DISC / USB. Program Recording Use Program Recording to preset the unit to record your favorite radio program. Timer Source Tuner Choose TUNER REC as the source to record radio at the preset time. Make sure the mp3 player is connected and have enough memory space. If TUNER REC is selected, press or to select the preset station. 9 Settings Sleep Timer View Remaining Sleep Time EN You can select the time interval in minutes before When sleep is activated, press SLEEP once to the unit turns off automatically. view remaining sleep time. Press SLEEP to select among OFF, 120, 90, 60, 45, 30, 15 and 5 minutes. Adjust Sleep Time The SLEEP icon lights on the display when sleep Press SLEEP again when the remaining sleep time timer is activated. is displayed to change sleep time. Note: Sleep is automatically de-activated when the unit is turned off. Sound Features Volume Control Rotate the volume control on the main unit or press VOL or on the remote control to adjust volume level. The volume level shows briefly on the display. Bass Boost Press B.BOOST to turn on/off boosting the bass frequency. The BASS BOOST icon lights on the display when it is activated. Muting Audio Press on the remote to cut the sound (Remote Only). MUTE flashes on the display. Using Preset Equalizer Curves Press EQ to toggle among FLAT, ROCK, POP, JAZZ, CLASSIC and CUSTOM. The display shows your selection briefly and the relative icon lights on the display. Creating a Custom Curve 1. Press EQ to select CUSTOM mode. 2. While CUSTOM is displayed, press or to cycle among displayed bass and treble range levels. 3. While BAS and TRE is displayed, adjust volume control to set the associated gain between -10 - +10. 4. Press EQ to exit. Custom Bas +02 TRE 00 10