RCA RS2135I RS2135i Product Manual - Page 12

Advanced Navigation Controls Tips on Playback Sequence of Disc • Check that the mp3/WMA disc is created with a single folder structure. Refer to the diagram below for playback sequence details on multi-level folder structure. • For example, the folders and songs from level 2 are played before moving to play folders and songs from level 3. • Folder playback sequence is indicated by the letters A to G. • Song playback sequence is indicated by the numbers (1 to 15) in front of the song name. LEVEL 1 A Folder 1 B Folder 2 C Folder 3 1 Song 4 2 Song 5 LEVEL 2 D Folder 1.1 E Folder 1.2 F Folder 2.1 3 Song 2.2 4 Song 2.3 5 Song 2.4 6 Song 3.1 7 Song 3.2 LEVEL 3 8 Song 1.1.1 9 Song 1.1.2 10 Song 1.1.3 G Folder 1.2.1 11 Song 2.1.1 12 Song 2.1.2 LEVEL 4 13 Song 1.2.1.1 14 Song 1.2.1.2 15 Song 1.2.1.3 Troubleshooting Tips Unit will not turn on • Check the power cord for a secure connection. • Unplug the unit for a moment, and then plug into power source again. • Check the outlet by plugging in another device. No sound • Increase the volume setting. • Check the connection to speakers. • Check that you have selected the appropriate function: CD, Tuner. • Make sure the mute is off. • Make sure the headphones are not plugged in. Poor radio reception • Check the antenna connection. • Move antenna. • Turn off nearby electrical appliances, such as hair dryer, vacuum cleaner, microwave and fluorescent lights. CD does not play • Check that the CD is in the tray. • Check that the CD label is facing up. • Check that PAUSE mode is not on. • Check that the CD function is selected. • Use the CD lens cleaner. • Clean the disc. • Try another CD. CD sound skips • Clean the disc. EN • Check the disc for warping, scratches, or other damage. • Check if something is causing the unit to vibrate. If so, move the unit. • Make sure the speakers are at least 3 feet away or on a different surface from the main unit. CD button will not respond, or does not change discs when you press DISC SKIP • Switch to another function (Tuner) and then back to CD. Remote control does not work • Check that the batteries are properly installed. • Replace any weak batteries. • Check the unit is plugged into power source. • Point the remote directly at the unit's front panel. • Move closer to the unit. • Remove any obstacles between the remote and the unit. 21 22