RCA RS2135I RS2135i Product Manual - Page 7

Display and Settings Display Source indication mp3 WMA PROGRAM STEREO EQ B.BOOST SLEEP RDS INTRO REPEAT 1ALL DISC S 3. Press / to set the minute. 4. Press TIMER to change to Timer Off setting with clock time flashing. Repeat steps 2 & 3 for timer off time setting. 5. Press TIMER to select source. Press / to select TUNER/TUNER REC/DISC/USB/iPod. If TUNER REC is selected, press / to select the preset station. 6. Press TIMER to set volume. Adjust VOLUME CONTROL to select desired volume level. 7. Press TIMER to save settings. Press TUNE/ PRESET to cancel setting. The timer is automatically activated once timer setting is saved. Play Mode status CD Tray Status: Lights up when loaded. Flashes when playing. Setting the Clock 1. Press and hold CLOCK on the remote control until the hour flashes on the display. 2. Press / to set the hour and then press CLOCK to shift to minute digits. 3. Press / to set the minute. 4. Press CLOCK to save settings. Or press TUNE/PRESET to cancel the setting. Timer and Program Recording You can turn on/off the unit or record TUNER at preset times by setting the timer. You can use Program Recording to preset the unit to record your favorite radio program. When setting the timer, choose TUNER REC as the source to record radio at the preset time. Ensure there is adequate memory in the USB device connected. Activating the Timer Press TIMER to turn on/off the alarm. The timer icon is displayed when timer is activated. Sleep Mode You can select the time interval in minutes before the unit turns off automatically. Press SLEEP to select among OFF, 120, 90, 60, 45, 30, 15 and 5 minutes. The SLEEP icon lights on the display when sleep mode is activated. View and Adjust Remaining Sleep Time When sleep is activated, press SLEEP once to view remaining sleep time. Press again to change the time. Note: Sleep is automatically de-activated when the unit is turned off. Showing Demonstration Press DEMO to turn on/off demonstration mode. Setting the Timer 1. Press and hold TIMER on the remote control until Timer On and the clock hour flash on the display. 2. Set the Timer ON setting. Press / to set the hour and then press TIMER to shift to minute digits. 11 Sound Features Volume Control Turn the volume control on the main unit or press VOL / on the remote control to adjust volume level. The volume level shows briefly on the display. Using Preset Equalizer Curves Press EQ to toggle among FLAT, ROCK, POP, EN JAZZ, CLASSIC and CUSTOM. The display shows your selection briefly and the relative icon lights on the display. Bass Boost Press B.BOOST to turn on/off boosting the bass frequency. The BASS BOOST icon displays when it is activated. Muting Sound Press on the remote to mute the sound. When MUTE is on, the symbol flashes. Creating a Custom Curve 1. Press EQ to select CUSTOM mode. 2. While CUSTOM is displayed, press / to cycle among displayed bass and treble range levels. 3. While BAS and TRE is displayed, adjust volume control to set the associated gain between -10 and +10. 4. Press EQ to save setting and exit. CD and mp3 Disc Playback Loading Discs 1. Press DISC 1 /2 /3 /4 /5 on the main unit to open the desired disc tray. 2. Insert a disc with label facing up. 3. Press the same DISC key to close the disc tray, or press a different DISC key to open a different disc tray directly. 4. Repeat steps 2-4 to load discs in all the disc trays. The occupied disc tray icons displays and the current disc icon flashes on the display. If the disc is a mp3 / WMA CD, the respective MP3 and WMA icon will be displayed. Playing Discs To play all discs in the disc tray Press in stop mode to begin playback. To play a specific disc in the disc tray • From other modes (e.g. TUNER), press DISC 1 - DISC 5 to play the corresponding disc. If there is no disc in the corresponding disc tray, the next occupied tray will be played. • In CD mode, press SKIP DISC to play the next available disc. To play a specific track in the disc Press / to select the track and press to start playback. Pause Discs Press during playback to pause disc. Press again to resume. Play and load simultaneously While playing one disc, you can press DISC to open or close other disc trays to load or change disc without interrupting the playback. Stop Playback During playback, press TUNE/PRESET to stop playback. The unit returns to navigation mode briefly (approximately 10 seconds) before entering stop mode. Tips: • See pages 19 - 20 for details on Navigation Mode. • In CD stop mode, press SELECT/ to enter navigation mode and show disc menu. • In CD navigation mode, press /BACK to return to stop mode. 12