RCA RS2620 User Guide - Page 5

Sound Features EN Preset Equalizer Curves Press PRESET EQ on the main unit or EQ on the remote to toggle among FLAT, ROCK, POP, JAZZ, CLASS and CUSTOM. The display shows the selection briefly. Creating Custom Curve 1. Press PRESET EQ to select CUSTOM mode. 2. While "CUSTOM" is displayed, press DIGITAL TUNING / to cycle among displayed bass- and treble - range levels. 3. While BAS or TRE is displayed, adjust VOLUME CONTROL to set the associated gain BAS+08 between -10 - +10. BASS BOOST Press BASS BOOST to turn on/off boosting the bass frequency. Muting Audio Press MUTE on the remote to cut the sound. (Remote Only) MUTE CD Player CD-R / RW This unit is compatible with CD-RW/ CD-R discs for playback. Notes on CD-R/RW Disc: • Do not affix any type of labels to either side (recordable or labeled side) of a CD-R/RW disc as this may result in the unit malfunctioning. • To avoid damages to the CD-R/RW disc, do not open the disc compartment door while the disc is being read. • Do not load an unrecorded CD-R/RW disc into the unit. This may take a longer time to read the disc. • Playback capability for CD-RW discs may vary due to variations in the quality of the CD-RW disc and the recorder used to create the disc. Loading Discs 1. Press SOURCE repeatedly to select CD mode. 2. Press OPEN/CLOSE to open the drawer. 3. Insert up to five discs with label face up. (Press DISC SKIP to rotate the disc carrier.) 4. Press OPEN/CLOSE to close the drawer. Loaded disc position icon lights. Playing Discs • Press PLAY/PAUSE to begin or pause play, and STOP to stop play. • Press SKIP BACKWARD / SKIP FORWARD to select a specific track. Tip: While playing a CD, press and hold SKIPFORWARD or BACKWARD for more than 2 seconds to search through the CD. 6 CD Player Play and Load Simultaneously 1. Press OPEN/CLOSE to open the tray while a CD is playing 2. Load/change discs for available trays by pressing DISC SKIP. 3. Press OPEN/CLOSE to close the tray. Skipping a Disc Press DISC SKIP. Setting Up a CD Program EN You can program the CD player to play up to any 32 tracks on the CDs in the tray. 1. While the CD player is stopped, press PROG•SET to enter program mode. The system displays the next available program number: "- - P:01," with "- -" flashing, prompts you for the first track in the program list. 5 P:01 Searching Through a CD Press and hold SKIP BACKWARD / SKIP FORWARD to search through a CD while it is playing. Shuffling the Play Order Press SHUFFLE to turn on/off the playing of tracks in random order. (Remote Only) Sampling Tracks Press INTRO to play the first 10 seconds of each track on the current disc, all discs in the tray, or turn INTRO mode off. (Remote Only) Note: You may also press REPEAT to select 1 disc or all discs before activating INTRO & SHUFFLE functions 2. Press SKIP BACKWARD / SKIP FORWARD to select a track (press DISC SKIP to select a track from a different disc). 3. Immediately press PROG•SET to assign the selected track to the program number. After 3 seconds, you are prompted for the next track in the program list. (In CD program mode, PROG icon will be lit.) Playing a Program List While in PROGRAM mode, press PLAY/PAUSE . Displaying the Program List 1. While the CD player is stopped, press PROG•SET to enter PROGRAM mode. 2. Press PROG•SET repeatedly to list each track assignment in the program list. Repeat Press REPEAT to repeat the current track, current disc, all discs, or turn REPEAT mode off. Deleting Program List While in PROGRAM mode, press and hold STOP for 3 seconds. They system displays the message CLEAR. Tips: • You can create a program of up to 32 tracks. • Press CD DISPLAY repeatedly to view elapsed track time, track number, track remain time and disc remain time. Caution: Do not push to force closing of the tray during CD playback or tray opening. 7