Reebok 8700es Treadmill English Manual - Page 7

1. Make sure that the power cord is unplugged. 1 With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (56) so that the treadmill is more stable; do not fully fold the Frame yet. Cut the shipping tie securing the Upright Wire (38) to the Base (83). Locate a tie in the indicated hole in the Base, and use the tie to pull the Upright Wire out of the hole. Attach a Base Foot (81) to the Base (83) in the location shown with a Base Foot Spacer (13) and a #8 x 1" Tek Screw (2). Then, attach another Base Foot (81) with only a #8 x 1" Tek Screw (2). Hole 83 56 13 81 2 38 81 2 2. Remove the 3/8" Nut (8) and the 3/8" x 2" Bolt 2 (4) from the Base (83). Attach a Wheel (84) with the Bolt and the Nut that you just removed. Do not overtighten the Nut; the Wheel must turn freely. Cut the tie off the Upright Wire (38). Tie 38 83 4 84 8 3. Identify the Right Upright (78) and the Right 3 Upright Spacer (79), which are marked with stickers. Insert the Upright Wire (38) through the 78 Right Upright Spacer as shown. Set the Right Upright Spacer on the Base (83). Be careful not to pinch the Upright Wire. 38 Have a second person hold the Right Upright (78) near the Base (83). See the inset drawing. Tie the long tie in the Right Upright securely around the end of the Upright Wire (38). Then, pull the other end of the long tie until the Upright Wire is routed completely through the Right Upright. 38 79 Long Tie 83 78 38 Long Tie 7