Reebok 8700es Treadmill English Manual - Page 8

4. Hold a Bolt Spacer (88) inside the lower end of the Right Upright (78). Insert a 3/8" x 4 1/2" Bolt 4 (6) with a 3/8" Star Washer (9) into the Right Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (88), 3/8" x 4 1/2" Bolt (6), and 3/8" Star Washer (9). Then, set the Right Upright in the Right Upright Spacer (79). Partially tighten the 3/8" x 4 1/2" Bolts (6); do not fully tighten the Bolts yet. 6 78 9 79 38 88 5. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (56) so the treadmill is more stable; do not fully fold the Frame yet. Attach a Base Foot (81) to the Base (83) in the location shown with a #8 x 1" Tek Screw (2) and a Base Foot Spacer (13). Then, attach another Base Foot (81) with only a #8 x 1" Tek Screw (2). Remove the 3/8" Nut (8) and the 3/8" x 2" Bolt (4) from the Base (83). Attach a Wheel (84) with the Bolt and the Nut that you just removed. Do not overtighten the Nut; the Wheel must turn freely. 5 81 2 83 56 4 13 84 2 81 8 6. Set the Left Upright Spacer (76) on the Base (83). Hold a Bolt Spacer (88) inside the lower end of the Left Upright (74). Insert a 3/8" x 4 1/2" Bolt (6) with a 3/8" Star Washer (9) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (88), 3/8" x 4 1/2" Bolt (6), and 3/8" Star Washer (9). Then, set the Left Upright in the Left Upright Spacer. Partially tighten the 3/8" x 4 1/2" Bolts (6); do not fully tighten the Bolts yet. With the help of a second person, tip the treadmill so that the Base (83) is flat on the floor. 6 9 88 6 74 76 83 8