Reebok Competitor Rt 5.1 Treadmill User Manual - Page 12

Do not fully tighten the Screws and, Bolt yet., Attach the Left Handrail 84 in the same way.

Page 12 highlights

9. Cut the plastic ties in the Left Handrail (84) and the Right Handrail (85). If necessary, press the 9 5/16" Cage Nuts (31) back into place. 84 31 Identify the Right Handrail (85), and hold it near the Right Upright (81). Insert the Upright Wire (88) through the bracket on the bottom of the Right Handrail. Pull the Upright Wire out of the end of the Right Handrail. Tie 88 85 Tie 31 81 10. Attach the Right Handrail (85) to the Right Upright (81) with two 5/16" x 1" Screws (5), two 5/16" Star Washers (13), and a 5/16" x 1 1/4" Bolt (2). Do not fully tighten the Screws and Bolt yet. Attach the Left Handrail (84) in the same way. 10 84 80 2 13 5 5 13 85 2 81 11. Set the console assembly face down on a soft surface to avoid scratching the console assem- 11 3 bly. Remove the two Screws (A). Next, lift off the Crossbar (107). Discard the two Screws. Remove and save the four 1/4" x 1/2" Screws (3). They will be used in step 13. A 107 12 Console Assembly 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

12
10.
Attach the Right Handrail (85) to the Right
Upright (81) with two 5/16" x 1" Screws (5), two
5/16" Star Washers (13), and a 5/16" x 1 1/4"
Bolt (2).
Do not fully tighten the Screws and
Bolt yet.
Attach the Left Handrail (84) in the same way.
10
80
85
84
2
2
5
5
13
13
81
11.
Set the console assembly face down on a soft
surface to avoid scratching the console assem-
bly. Remove the two Screws (A). Next, lift off the
Crossbar (107). Discard the two Screws.
Remove and save the four 1/4" x 1/2" Screws
(3). They will be used in step 13.
107
Console
Assembly
A
3
3
11
9.
Cut the plastic ties in the Left Handrail (84) and
the Right Handrail (85). If necessary, press the
5/16" Cage Nuts (31) back into place.
Identify the Right Handrail (85), and hold it near
the Right Upright (81). Insert the Upright Wire
(88) through the bracket on the bottom of the
Right Handrail. Pull the Upright Wire out of the
end of the Right Handrail.
84
85
9
81
31
88
Tie
31
Tie