Reebok Competitor Rt 5.1 Treadmill User Manual - Page 21

HOW TO USE AN ONBOARD WORKOUT 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 19. 2. Select an onboard workout. To select an onboard workout, press the Timed button, the Calories button, or the Distance button repeatedly until the desired workout appears in the display. When you select an onboard workout, the displays will show the maximum incline, the maximum speed, and the duration of the workout. In addition, a prole of the speed settings of the workout will appear in the matrix. If you select a distance workout, the distance will appear instead of the prole. 3. Start the workout. Press the Start button or the Speed increase button to start the workout. A moment after you press the button, the treadmill will automatically adjust to the rst speed and incline settings of the workout. Hold the handrails and begin walking. Each workout is divided into segments. One speed setting and one incline setting are programmed for each segment. Note: The same speed setting and/ or incline setting may be programmed for consecutive segments. During a timed workout or a calorie workout, the Current Segment prole will show your progress. The ashing segment of the prole represents the current segment of the workout. The height of the ashing segment indicates the speed setting for the current segment. grammed for the next segment, the new speed and/ or incline setting will ash in the displays for a few seconds. The treadmill will automatically adjust to the new speed and/or incline setting. The workout will continue in this way until the last segment of the prole ashes in the display and the last segment ends. The walking belt will then slow to a stop. If the speed or incline setting is too high or too low at any time during the workout, you can manually override the setting by pressing the Speed or Incline buttons; however, when the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings for the next segment. To stop the workout at any time, press the Stop button. The time will begin to ash in the display. To resume the workout, press the Start button or the Speed increase button. The walking belt will begin to move at 1 mph. When the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings for the next segment. 4. Follow your progress with the displays. See step 5 on page 20. 5. Measure your heart rate if desired. See step 6 on page 20. 6. Turn on the fan if desired. See step 7 on page 20. 7. When you are nished exercising, remove the key from the console. See step 8 on page 20. At the end of each segment, a series of tones will sound. If a new speed and/or incline setting is pro- 21