Reebok R 5.80 Treadmill English Manual - Page 8

4. Set the Right Upright Spacer (79) on the Base (83). Be careful not to pinch the Upright Wire 4 (38). With the help of a second person, insert 6 two 3/8" x 5" Bolts (6) with two 3/8" Star Washers (9) into the Right Upright (78) and set the Right Upright into the Right Upright Spacer. If necessary, use a rubber mallet on top of the 77 78 79 9 Right Upright to make sure that the Upright is fully inserted into Spacer. Partially tighten the 3/8" x 5" Bolts (6) by turning them several times; do not fully tighten the Bolts yet. Press a Base Endcap (77) into the Base (83). 38 83 5. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (56) so that the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated bolts (A) and the shipping bracket (B). Attach a Base Pad (81) to the Base (83) in the location shown with a #8 x 1" Tek Screw (2) and a Base Pad Spacer (13). Then, attach another Base Pad (81) with only a #8 x 1" Tek Screw (2). Remove the 3/8" Nut (8), the 3/8" x 2" Shoulder Bolt (32), and the shipping bracket (C) from the Base (83). Attach a Wheel (84) with the Bolt and the Nut that you just removed. Do not overtighten the Nut; the Wheel must turn freely. Discard the shipping bracket. 5 81 2 6. Set the Left Upright Spacer (76) on the Base (83). With the help of a second person, insert two 3/8" x 5" Bolts (6) with two 3/8" Star Washers (9) into the Left Upright (74) and set the Left Upright into the Left Upright Spacer. If necessary, use a rubber mallet on top of the Left Upright to make sure that the Upright is fully inserted into the Left Upright Spacer. Partially tighten the 3/8" x 5" Bolts (6) by turning them several times; do not fully tighten the Bolts yet. Press a Base Endcap (77) into the Base (83). With the help of a second person, tip the treadmill so that the Base (83) is flat on the floor. 6 77 8 A B 83 56 32 13 84 2 81 C 8 6 74 9 76 83