Reebok R 5.80 Treadmill English Manual - Page 9
Sole May Be Damaged When
View all Reebok R 5.80 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
7. Set the console assembly face down on a soft surface to avoid scratching the console assembly. Hold the Right Handrail (95) near the console assembly. Next, insert the console wire into the large hole in the Right Handrail and out of the top as shown. If necessary, use needlenose pliers to help pull the console wire out. Attach the Right Handrail (95) and the Left Handrail (not shown) with four #8 x 3/4" Screws (1) (only two are shown). Make sure that no wires are pinched. Start all four Screws before tightening any of them; do not overtighten the Screws. 7 95 8. Tighten a 1/4" x 1 1/4" Bolt (5) with a 1/4" Star 8 Washer (33) into the bracket and Handrail Crossbar (94) on each side of the console as- sembly (only one side is shown). Remove the wire tie from the console wire. Console Wire 1 Hole 1 Console Assembly 5 Wire 33 Tie Console Assembly 94 9. Have a second person hold the console assembly near the Right Upright (78) and Left Upright 9 (not shown). Connect the Upright Wire (38) to the console wire. See the inset drawing. The Console Assembly connectors should slide together easily and snap into place. If they do not, turn one connec- tor and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CON- SOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Remove the long tie from the Upright Wire (38). Console Wire Attach the console assembly to the Right Upright (78) and Left Upright (not shown) with four 5/16" x 3 1/4" Bolts (7) and four 5/16" Star Washers (10) (only two are shown). Be careful not to pinch the wires. See steps 4 and 6. Tighten the four 3/8" x 5" Bolts (6). 78 Console 38 Long Wire Tie 10 7 38 9