Reebok Rl 10.0 Elliptical English Manual - Page 5

ASSEMBLY To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480. Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included hex keys, assembly requires a Phillips screwdriver , an adjustable wrench , and a rubber mallet . As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it has been preassembled. Star Washer M4 x 13mm M6 Split M8 x 15mm x 4.5mm M8 Split Wave Washer (100)-3 Washer (93)-2 Washer (88)-8 Washer (99)-4 Washer (72)-4 (98)-8 M10 x 20mm x 1mm Washer (81)-2 M10 x 25mm Washer (94)-10 M8 Nylon Locknut (96)-4 M10 Nylon Locknut (97)-2 M4 x 16mm M4 x 16mm Self-tapping Screw (86)-8 Screw (79)-16 M6 x 35mm Phillips Screw (87)-8 M8 x 42mm Bolt (71)-4 M8 x 16mm Patch Screw (82)-3 M8 x 75mm Patch Screw (107)-4 M10 x 20mm Patch Screw (91)-10 M10 x 23mm Shoulder Screw (80)-2 M10 x 62mm Patch Bolt (89)-2 M10 x 78mm Patch Screw (90)-2 5