Reebok Rl 10.0 Elliptical English Manual - Page 9
Connect the Left Handlebar Wire 108 to
View all Reebok Rl 10.0 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
8. Position an Inner Handlebar Cover (18) and an Outer Handlebar Cover (19) around the Left Handlebar (8) as shown. Then, pull the Left Handlebar Wire (108) out of the Left Handlebar and insert it through the Inner Handlebar Cover. Attach the Inner and Outer Handlebar Covers (18, 19) with three M4 x 16mm Self-tapping Screws (79) and an M4 x 13mm Washer (93). Start all three Self-tapping Screws before tightening any of them. Avoid pinching the Left Handlebar Wire (108) during this step. Repeat this step for the Right Handlebar and the Right Handlebar Wire (not shown). 8 19 79 108 8 79 18 93 79 Avoid pinching the Handlebar Wires (108, 109) during this step 9. Apply a generous amount of grease to the Pivot Axle (65) and insert it into the Frame (2). Pull the Left Controller Wire (110) through the left Frame Cover (17), and then pull the Right Controller Wire (111) through the right Frame Cover. Attach each Frame Cover (17) to the Frame (2) with two M4 x 16mm Screws (86). Avoid pinching the Controller Wires (110, 111) during this step. 9 Grease 65 17 86 110 2 86 111 17 Avoid pinching the Controller Wires (110, 111) during this step 10. Connect the Left Handlebar Wire (108) to the Left Controller Wire (110). Insert the excess wire 10 into the Left Handlebar (8). Avoid pinching the wires during Apply a small amount of grease to both sides of this step 110 9 a Wave Washer (98). Slide the Wave Washer 108 onto the left side of the Pivot Axle (65). Next, slide the Left Handlebar (8) onto the Pivot Axle 8 as shown. Attach the Left Handlebar with an M10 x 23mm Shoulder Screw (80) and an M10 x 20mm x 1mm Washer (81). Avoid pinching the wires during this step. 81 80 65 98 Repeat this step for the Right Handlebar (9). Grease 9