Reebok T 12.80 Treadmill English Manual - Page 7

2. Identify the Left Upright (73) and the Right Upright (74). See the inset drawing. Tie the wire tie in the Right Upright securely around the end of the Upright Wire (75). With the help of a second person, hold the Right Upright near the Right Base Cover (77). Then, pull the other end of the wire tie up through the rectangular hole in the bottom of the Right Upright until the Upright Wire is routed completely through the Right Upright. Gently pull up on the Upright Wire (75) as you set the Right Upright (74) on the Base (83) inside the Right Base Cover (77). Be careful not to pinch the Upright Wire. Attach the Right Upright (74) to the Base (83) with two 3/8" x 3 3/4" Bolts (72) and two 3/8" Star Washers (90). Do not tighten the Bolts yet. Note: It may be necessary to tip the top of the Right Upright forward slightly and rotate the bottom as you thread the Bolts into the Right Upright. Attach the Left Upright (73) to the Base (83) in the same way. Note: There are no wires on the left side. With the help of a second person, lower the treadmill off the cardboard stand. Save the cardboard stand for step 8. 3. Identify the Left Upright Sleeve (95) and the Right Upright Sleeve (96); the Sleeves are labeled "Left" and "Right." Slide the Left Upright Sleeve onto the Left Upright (73) and the Right Upright Sleeve onto the Right Upright (74). 2 73 74 75 Wire Tie 3 73 Wire Tie 75 74 77 83 90 72 95 "Left" "Right" 96 74 7