Reebok Vista 8500 Treadmill English Manual - Page 9
small cylinder is oriented as shown.
View all Reebok Vista 8500 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
If you purchase the optional chest pulse sensor (see page 22), follow the steps below to install the receiver included with the chest pulse sensor. 1. Make sure that the key is removed from the console and that the power cord is unplugged. Remove the indicated Screws (3) from the back of the Console Base (85). 2. Connect the wire on the receiver (A) to the indicated wire on the Console (34). Hold the receiver so the small cylinder is oriented as shown. Next, remove the tape from the back of the receiver, and press the receiver onto the Console Base (85) in the location shown. 34 Small Cylinder A Wire 3 85 3 3. Make sure that no wires are pinched. Reattach the Console (34) with the Screws (3). Discard the other wires included with the receiver. 3 3 9