Ricoh 3035 Copy Reference - Page 28
Interrupt Copy, Original Beeper, Clear/Stop, Clear Modes, Clear, Interrupt, Start
View all Ricoh 3035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Copying -How to operate ❖ To stop the machine during a multicopy run. Press the {Clear/Stop} key. 2 ❖ To return the machine to the initial condition after copying. Press the {Clear Modes} key. ❖ When clearing entered values. Press the {Clear/Stop} key or [Clear] on the display. ❖ To check the settings. Press the {Check Modes} key. Interrupt Copy Use this function if you want to interrupt a long copy job to make urgently needed copies. Limitation ❒ You cannot use the Interrupt Copy function when fax originals are being scanned or the scanner function is being used. A Press the {Interrupt} key. The Interrupt indicator goes on. When the originals stop scanning A Remove the originals that were being copied and place the originals you want to copy. B Press the {Start} key. The machine starts making the copies. C When copying is complete, remove the originals and copies. D Press the {Interrupt} key again. The Interrupt indicator goes off. 18 E When the display prompts you, place the remaining originals again before interrupting. F Press the {Start} key. Note ❒ The interrupt copy job set- tings will be restored and the machine will continue copying from where it left off. When the machine keeps copying A Place the originals you want to copy. B Press the {Start} key. The machine stops the previous original job and starts copying the original. C When copying is complete, remove originals and copies. D Press the {Interrupt} key again. The Interrupt indicator goes off. The interrupt copy job settings will be restored and the machine will continue copying from where it left off. Original Beeper The beeper sounds and an error message is displayed when you leave your originals on the exposure glass after copying. Note ❒ See p.94 "Tone: Original remains".