Ricoh 3245 General Settings Guide - Page 158
Where to Put Your Machine
UPC - 026649128660
View all Ricoh 3245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Remarks Where to Put Your Machine Machine Environment Choose your machine's location carefully. Environmental conditions greatly affect its performance. Optimum environmental conditions R CAUTION: • Keep the machine away from hu- midity and dust. Otherwise a fire or an electric shock might occur. • Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur. 6 R CAUTION: • If you use the machine in a con- fined space, make sure there is a continuous air turnover. • Temperature: 10-32 °C (50-89.6 °F) (humidity to be 54% at 32 °C, 89.6 °F) • Humidity: 15-80% (temperature to be 27 °C, 80.6 °F at 80%) • A strong and level base. • The machine must be level within 5 mm, 0.2 inches: both front to rear and left to right. • To avoid possible buildup of ozone, be sure to locate this machine in a large well ventilated room that has an air turnover of more than 30 m3/hr/person. 146 Environments to avoid • Locations exposed to direct sunlight or other sources of strong light (more than 1,500 lux). • Locations directly exposed to cool air from an air conditioner or heated air from a heater. (Sudden temperature changes can cause condensation to form inside the machine.) • Locations close to machines generating ammonia, such as a diazo copy machine. • Places where the machine will be subject to frequent strong vibration. • Dusty areas. • Areas with corrosive gases. Moving R CAUTION: • Unplug the power cord from the wall outlet before you move the machine. While moving the machine, you should take care that the power cord will not be damaged under the machine. Important ❒ Be careful when moving the machine. Take the following precautions: • Turn off the main power. See p.27 "Turning Off the Main Power". • Unplug the power cord from the wall outlet. When you pull out the plug from the socket, grip the plug to avoid damaging the cord, thereby reducing the risk of fire or electric shock.