Ricoh 3245 Printer Reference - Page 156

Appendix System Settings (Parallel Connection) ❖ Parallel Timing Specifies the timing for the parallel interface. Normally, you do not need to change this setting. • ACK Inside • ACK Outside • STB Down Note ❒ Default: ACK Inside ❖ Parallel Communication Speed Specifies the communication speed of the parallel interface. If the speed is too high, data may not be transferred smoothly. If this happens, change the setting to "Standard". • High Speed • Standard Note ❒ Default: High Speed 8 ❖ Selection Signal Status Specifies the signal level of the par- allel interface. • High • Low Note ❒ Default: High ❖ Input Prime Specifies whether the prime signal is active or inactive when an input prime signal is sent. Normally, you do not need to change this setting. • Effective • Invalid Note ❒ Default: Invalid 150 ❖ Bidirectional Communication Specifies, for instance, how a printer connected to the parallel interface responds to a status request. If you experience problems using another manufacturer's printer, set this to Off. Limitation ❒ If set to Off, asynchronous com- munication will not work. • On • Off Note ❒ Default: On ❖ Signal Control Specifies how to handle any errors that occur when printing from a computer. Normally, you do not need to change this setting. • Job Acceptance Priority • Printer Priority Note ❒ Default: Job Acceptance Priority