Ricoh Aficio MP 1600 Network Guide - Page 61
bonjour(rendezvous), IP TTL setting
View all Ricoh Aficio MP 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Remote Maintenance by telnet bonjour(rendezvous) Use the "bonjour(rendezvous)" command to display bonjour(rendezvous)-related settings. ❖ IP TTL setting msh> bonjour ip ttl {1-255} You can specify the IP TTL (the number of routers a packet can pass through). ❖ View settings Bonjour settings are displayed. Note ❒ The default is 255. 2 msh> bonjour ❖ Resetting the computer name and lo- ❖ Bonjour service name setting You can specify the bonjour service name. msh> bonjour cname "computer name" • The computer name can be entered using up to 63 alphanumeric characters. cation information You can reset the computer name and location information. msh> bonjour clear {cname | location} • cname Reset the computer name. The default computer name will be displayed when the computer is ❖ Bonjour Installation location information setting You can enter information about the location where the printer is installed. restarted. • location Reset the location information. The previous location information will be deleted. msh> bonjour location "location" • Information about location can be entered using up to 32 alphanumeric characters. ❖ Setting order of priority for each protocol • diprint msh> bonjour diprint [0- 99] • lpr msh> bonjour lpr [0-99] ❖ Interface configuration msh> bonjour linklocal "interface_name" • If many types of interface are installed, configure the interface that communicates with linklocal address. • If you do not specify an interface, the Ethernet interface is automatically selected. • wlan can be specified only when the IEEE 802.11b interface is installed. • ipp Interface Interface configured msh> bonjour ipp [0-99] ether You can specify the order of prior- ity for "diprint", "lpr", and "ipp". wlan Smaller numbers indicate higher priority. Ethernet interface IEEE 802.11b interface 53