Ricoh Aficio MP 1600 Network Guide - Page 79
wpa: WPA802.1X, phrase, Parameter, Value con d
View all Ricoh Aficio MP 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Parameter Value configured keyphrase [ "phrase" ] val [1|2|3|4] You can specify the WEP key when entering in ASCII. With a 64-bit WEP, you can use10 digit hexadecimals. With a 128-bit WEP, you can use 26 digit hexadecimals. Up to four WEP keys can be registered. Specify the number to be registered with "val". When a WEP is specified by key phrase, the WEP specified by key is overwritten. To use this function, set the same key number and WEP key for all ports that transmit data to each other. You can omit the numbers with "val". The key number is set to 1 when making these omissions. The default is blank. encval [1|2|3|4] You can specify which of the four WEP keys is used for packet encoding. "1" is set if a number is not specified. wepauth [open|shared] You can set an authorization mode when using WEP. The specified value and authorized mode are as follows: open: open system authorized (default) shared: shared key authorized rate Remote Maintenance by telnet Parameter Value configured rate [auto|11m|5.5m|2m |1m] You can set the IEEE 802.11b transmitting speed. The speed you specify here is the speed at which data is sent. You can receive data at any speed. auto: automatically set (default) 11m: 11 Mbps fixed 5.5m: 5.5 Mbps fixed 2m:2 Mbps fixed 1m: 1 Mbps fixed security {none|wep|wpa} You can specify the security mode. none: No encryption(default)S wep: WEP encryption wpa: WPA encryption wpaenc {tkip|ccmp} You can specify WPA encryption key when using WPA encryption. tkip: TKIP (default) ccmp: CCMP (AES) wpaauth {wpapsk|wpa} You can specify the WPA authentication mode when using WPA encryption. wpapsk: WPAPSK authentication(default) wpa: WPA(802.1X) authentication psk "character string" You can specify the Pre-Shared key. Usable characters: ASCII 0x20-0x7e (8 to 63 bytes). The default is blank. 2 71