Ricoh Aficio MP 2000 Network Guide - Page 63
diprint, DNS server address selection, Domain name selection, View settings, Setting timeout
View all Ricoh Aficio MP 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Remote Maintenance by telnet ❖ DNS server address selection msh> dhcp dnsaddr {dhcp | static} • Specify whether to obtain the DNS server address from the DHCP server or use the address set by a user. • To obtain the DNS server address from the DHCP server, specify "dhcp". To use the address set by a user, specify "static". ❖ Domain name selection msh> dhcp domainname {dhcp | static} • Specify whether to obtain the domain name from the DNS server or use the domain name set by a user. • To obtain the domain name from the DHCP server, specify "dhcp". To use the domain name set by a user, specify "static". Reference p.103 "Using DHCP" p.56 "dns" p.57 "domainname" diprint The direct printing port enables direct printing from a network-connected computer. Use the "diprint" command to change direct printing port settings. 2 ❖ View settings The following command displays the current direct printing port set- tings: msh> diprint Example output: port 9100 timeout=300(sec) bidirect on con multi apl async • The "port" specifies the port number of the direct printing port. • The "bidirect" setting indicates whether the direct printing port is bidirectional or not. ❖ Setting timeout msh> diprint timeout [30~65535] • You can specify the timeout interval to use when the printer is expecting data from the network. • The default is 300 seconds. ❖ Specifying the number of concurrent connections msh> diprint con {multi | single} • The above command specifies the number of concurrent diprint connections. Specify "multi" for multiple connections or "single" for a single connection. • The default is "multi". 55