Ricoh Aficio MP 6001 Operating Instructions - Page 101
Printer priority. See Interface Settings - windows 2008 drivers
View all Ricoh Aficio MP 6001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Other Printing Problems Problem Cause Solution It takes a long time to complete a print job. Documents with a lot of characters may take some time to print. On the RPCS printer driver's [Print Quality] tab, display the [Change User Settings...] dialog box, ensure that [Change methods to extract TrueType fonts] is checked, and then print. Images are printed in the The feed orientation you Set the same settings for both the wrong orientation. selected and the feed machine's feed orientation and the feed orientation selected in the orientation specified in [Paper source printer driver's option setup tray settings:] on the RPCS printer driver's might not be the same. [Change Accessories] tab. 4 When using Windows Bidirectional communication Set up optional devices on the Properties 2000/ XP/ Vista and is not working. of the printer. See the printer driver Help. Windows Server 2003/ 2003 R2/ 2008, optional components connected to the machine are not recognized. When using Windows 2000/ XP/ Vista and Windows Server 2003/ 2003 R2/ 2008, combined printing, booklet printing, or Auto Reduce / Enlarge printing does not come out as expected. The correct application or printer driver settings are not made. Make sure the application's paper size and orientation settings match those of the printer driver. If a different paper size and orientation are set, select the same size and orientation. A print instruction was issued User Authentication may from the computer, but have been set. printing did not start. Contact the administrators. The print job is not canceled even when the machine is switched to offline status. Even when the machine is offline, printing is performed when [Job Acceptance Priority] has been set in [Parallel Interface] in the [Interface Settings] in the System Settings menu. Change the setting of Signal Control to Printer priority. See "Interface Settings", Network and System Settings Guide . 99