Home » Ricoh Manuals » Multifunction Devices » Ricoh Aficio MP 7500 S/P » Manual Viewer

Ricoh Aficio MP 7500 S/P Troubleshooting - Page 84

Inserting Toner, System Status

View all Ricoh Aficio MP 7500 S/P manuals

Add to My Manuals
Save this manual to your list of manuals

Page 84 highlights

Adding Paper, Toner and Staples Important ❒ Fault may occur if you use toner other than the recommended type. ❒ When adding toner, do not turn off the operation switch. If you do, settings will be lost. ❒ Always add toner when the machine instructs you. ❒ When a message "D Add Toner" is shown on the display, replace the toner. ❒ Store toner containers in a cool, dry place free from direct sunlight. ❒ Store on a flat surface. Note ❒ You can still make about 1000 copies after the messages "D Toner Cartridge is almost empty." and "Replace Toner Cartridge." appear cyclically, but replace toner early to prevent poor copy quality. ❒ You can check name of the required toner name and the replacement procedure using the "D Add Toner" screen. 5 ❒ Press [System Status] to check contact number for consumables' order. For system status, see p.5 "Checking Machine Status and Settings". Inserting Toner The following describes how to replace toner. Important ❒ Do not shake the removed toner bottle. The remaining toner might scatter. 78 ANS001S

Section	Page
Operating Instructions Troubleshooting	1
Introduction	2
Important	2
Note	2
Caution	2
Power Source	2
Trademarks	2
Manuals for This Machine	3
TABLE OF CONTENTS	5
How to Read This Manual	7
Symbols	7
1. When the Machine Does Not Operate As wanted	9
Indicators	9
Panel Tone	10
Checking Machine Status and Settings	11
When an Indicator to the Right of a Function Key is Lit	14
When You Have Problems Operating the Machine	15
When a Job is Not Performed	20
2. Troubleshooting When Using the Copy Function	25
When a Message Appears	25
Display During Connect Copy	30
If Connect Copy is Cancelled	31
If You Cannot Exit from Connect Copy	32
When You Cannot Make Clear Copies	33
When You Cannot Make Copies As Wanted	35
When Memory is Full	39
3. Troubleshooting When Using the Printer Function	41
When a Message Appears during Installation of the Printer Driver	41
Windows 95/98/Me	41
Windows 2000	42
Windows XP, Windows Server 2003	42
Windows NT 4.0	43
If USB Connection Fails	44
When a Message Appears	45
Status Messages	45
Alert Messages	46
Checking the Error Log	47
When You Cannot Print	48
Other Printing Problems	51
4. Troubleshooting When Using the Scanner Function	57
When Scanning is Not Done as Expected	57
When You Cannot Send Scanned Files	58
When Stored Files Cannot be Accessed	58
When You Cannot Browse the Network to Send a Scan file	58
When the TWAIN Driver Cannot be Started	58
When Stored Files Cannot be Edited	59
When the Network Delivery Function Cannot be Used	59
Operations are Not Possible When Messages Appear	59
When a Message is Displayed	60
When a Message is Displayed on the Control Panel	60
When a Message is Displayed on the Client Computer	67
5. Adding Paper, Toner and Staples	71
Loading Paper	71
Loading Paper into Tray 1 (Tandem Tray)	71
Loading Paper into Tray 2 and 3	73
Loading Paper into the Large Capacity Tray (LCT)	74
Loading Paper in the Interposer	75
Orientation-Fixed Paper or Two-Sided Paper	77
Changing the Paper Size	78
Changing the Paper Size in Tray 2 and 3	78
Changing to a Size that is Not Automatically Detected	81
Adding Toner	83
Inserting Toner	84
Used Toner	85
Adding Staples	86
3,000 Sheet-50 Sheet Staple Finisher and Booklet Finisher	86
3,000 Sheet-100 Sheet Staple Finisher	87
Booklet Finisher (Saddle Stitch)	88
6. Clearing Misfeeds	89
Removing Jammed Paper	89
Locating Jammed Paper	90
Removing Jammed Paper	92
Removing Jammed Staples	100
3,000 Sheet-50 Sheet Staple Finisher and Booklet Finisher	100
3,000 Sheet-100 Sheet Staple Finisher	101
Booklet Finisher (Saddle Stitch)	102
Removing Punch Waste	103
3,000 Sheet-50 Sheet Staple Finisher and Booklet Finisher	103
3,000 Sheet-100 Sheet Staple Finisher	104
7. Remarks	107
Where to Put Your Machine	107
Machine Environment	107
Optimum environmental conditions	107
Environments to avoid	108
Moving	109
Power Connection	110
Access to the Machine	111
Maintaining Your Machine	112
Cleaning the Exposure Glass	112
Cleaning the Exposure Glass Cover	112
Cleaning the Auto Document Feeder	113