Ricoh Aficio MP C3001 General Settings Guide - Page 15
Connecting to the USB Interface, Connect the other end to the USB2.0 port on the host computer. - driver
View all Ricoh Aficio MP C3001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
E Turn on the main power switch of the machine. Connecting to the Interfaces 1 AME005S A Indicator (green) Lights up green when the machine is connected correctly to the network. B Indicator (yellow) Lights up yellow when 100 BASE-TX is in operation. Goes off when 10 BASE-T is in operation. Note ❒ For details about installing the printer driver, see "Preparing the Ma- chine", Printer Reference. Reference "Turning On the Power", About This Machine "Preparing the Machine", Printer Reference Connecting to the USB Interface Connect the USB2.0 interface cable to the USB2.0 port. A Connect the USB2.0 interface cable to the USB2.0 port. AMB013S B Connect the other end to the USB2.0 port on the host computer. 7
Connecting to the Interfaces
7
1
E
Turn on the main power switch of the machine.
A
Indicator (green)
Lights up green when the machine is connected correctly to the network.
B
Indicator (yellow)
Lights up yellow when 100 BASE-TX is in operation. Goes off when 10
BASE-T is in operation.
Note
❒
For details about installing the printer driver, see “Preparing the Ma-
chine”, Printer Reference.
Reference
“Turning On the Power”, About This Machine
“Preparing the Machine”, Printer Reference
Connecting to the USB Interface
Connect the USB2.0 interface cable to the USB2.0 port.
A
Connect the USB2.0 interface cable to the USB2.0 port.
B
Connect the other end to the USB2.0 port on the host computer.
AME005S
AMB013S