Ricoh Aficio MP C3001 General Settings Guide - Page 70
Parallel Interface, ACK outside, High Speed, Inactive, Job Acceptance Priority - printer driver
View all Ricoh Aficio MP C3001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
System Settings Parallel Interface This section describes the user tools in the Parallel Interface menu under Interface Settings. [Parallel Interface] is displayed when this machine is installed with the IEEE 1284 interface board. 2 ❖ Parallel Timing Sets the timing for the control signal of the parallel interface. • ACK outside • ACK inside • STB down ❖ Parallel Communication Speed Sets the communication speed for the parallel interface. • High Speed • Standard ❖ Selection Signal Status Sets the level for the select signal of the parallel interface. • HIGH • LOW ❖ Input Prime Sets whether to validate or invalidate the input prime signal upon reception. • Active • Inactive ❖ Bidirectional Communication Sets the printer's response mode to a status acquisition request when using a parallel interface. • On • Off When set to [Off], bidirectional communication function will be disabled, and the printer driver will not be installed under Windows Auto Detect function. ❖ Signal Control Specify how error during printing or sending facsimile from the computer is to be dealt with. • Job Acceptance Priority • Printer Priority 62