Ricoh Aficio MP C305 Support Guide - Page 7

Product Support Guide, Installation

Page 7 highlights

Installation Product Support Guide Model D117/D118 Installation Requirements Temperature Range: 10° C to 32° C (50° F to 89.6° F) Humidity Range: 15% to 80% RH Ambient Illumination: Less than 1,500 lux (do not expose to direct sunlight) Ventilation: Ambient Dust: 3 times/hr/person or more. Less than 0.075 mg/m3 (2.0 x 10-6oz/yd3) Avoid areas exposed to sudden temperature changes: Areas directly exposed to cool air from an air conditioner. Areas directly exposed to heat from a heater. Do not place machine where it will be exposed to corrosive gas or vapor. Do not install the machine at any location over 2,000m (6,500 ft.) above sea level. Place the machine on a strong and level base. Inclination on any side should be no more than 5mm (0.2") Do not place the machine where it may be subject to strong vibrations. Machine level • Front to back: within 5mm (0.2") of level • Right to left: within 5mm (0.2") of level Power Requirements Input voltage level: 120 to 127 V, 60 Hz 15 Amp Do not place anything on power cord. Required wall outlet: Space Requirements NEMA 5-15R Receptacle Ver.1.1 A (Left) B (Rear) Over 70 mm (2.8 ") (Base machine) 120 mm (4.7 ") (with 1-bin tray unit) Over 100 mm (3.9 ") C (Right) Over 420 mm (16.5") D (Front) Over 420 mm (16.5") Page 7 of 48 Subject to change without notice 6/21/2012

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

Product Support Guide
Model D117/D118
Ver.1.1
Page 7 of 48
6/21/2012
Subject to change without notice
Installation
Installation Requirements
Temperature Range:
10
°
C to 32
°
C (50
°
F to 89.6
°
F)
Humidity Range:
15% to 80% RH
Ambient Illumination:
Less than 1,500 lux (do not expose to direct sunlight)
Ventilation:
3 times/hr/person or more.
Ambient Dust:
Less than 0.075 mg/m
3
(2.0 x 10-6oz/yd
3
)
Avoid areas exposed to sudden temperature changes:
Areas directly exposed to cool air from an air conditioner.
Areas directly exposed to heat from a heater.
Do not place machine where it will be exposed to corrosive gas or vapor.
Do not install the machine at any location over 2,000m (6,500 ft.) above sea level.
Place the machine on a strong and level base.
Inclination on any side should be no more than 5mm (0.2”)
Do not place the machine where it may be subject to strong vibrations.
Machine level
Front to back: within 5mm (0.2”) of level
Right to left: within 5mm (0.2”) of level
Power Requirements
Input voltage level:
120 to 127 V, 60 Hz 15 Amp
Do not place anything on power cord.
Required wall outlet:
Space Requirements
A (Left)
Over 70 mm (2.8 ") (Base machine)
120 mm (4.7 “) (with 1-bin tray unit)
B (Rear)
Over 100 mm (3.9 ")
C (Right)
Over 420 mm (16.5")
D (Front)
Over 420 mm (16.5")
NEMA 5-15R
Receptacle