Ricoh Aficio MP C4502 Manuals - Page 175
In [Tray Paper Settings], select a paper, Turn main Power Switch off
View all Ricoh Aficio MP C4502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
When You Have Problems Operating the Machine Problem Causes Solutions Sheets are curled when they are output. Certain types of A3 and 11 17 sheets can become curled when they are output. Paper misfeeds can occur if the output tray is set to internal tray 2 and multiple A3 or 11 17 sheets begin to curl as they are output. If sheets are curled when they are output, raise the guide on internal tray 2. For details about raising the guide, see "When Printouts on the Internal Tray 2 Are Curled", Getting Started . Cannot print in duplex mode. You have selected a paper tray that is not set for duplex printing. Change the setting for "Apply Duplex" in System Settings to enable duplex printing for the paper tray. For details about setting the "Apply Duplex", see "Tray Paper Settings", Connecting the Machine/ System Settings . Cannot print in duplex mode. You have selected a paper type that cannot be used for duplex printing. In [Tray Paper Settings], select a paper type that can be used for duplex printing. For details about the paper types that can be used, see "Duplex Copying", Copy/ Document Server . "Following output tray is full. The output tray is full. Remove paper." appears. Remove paper from the output tray to resume printing. If paper is destined for the finisher shift tray, to prevent paper from falling off the tray press the [Stop] key to suspend printing, and then remove the paper. Press [Continue] on the display panel to resume printing. "Turn main Power Switch off" appears. The machine does not shut down normally when the main power switch is turned off, and then immediately turned on. Turn off the machine. Wait for ten seconds or more after shutting it down, and then turn it on again. 173