Ricoh Aficio MP C4502 Manuals - Page 209

When Messages Are Displayed on the Control Panel Message "Exceeded the maximum unit count for Print Volume Use. The job has been cancelled." "Failed to obtain file system." "File system is full." "HDD is full." "HDD is full." "HDD is full. (Auto)" "I/O buffer overflow." Causes Solutions The number of pages the user is permitted to print has been exceeded. For details about print volume use limitation, see Security Guide . PDF direct printing could not be performed because the file system could not be obtained. Turn off the main power switch, and then back on again. If the message appears again, contact your service representative. PDF file does not print out because the capacity of the file system is full. Delete all unnecessary files from the hard disk, or decrease the file size sent to the machine. The hard disk became full while printing a Sample Print, Locked Print, Hold Print, or Stored Print file. Delete unneeded files stored in the machine. Alternatively, reduce the data size of the Sample Print, Locked Print, Hold Print, or Stored Print file. When printing with the PostScript 3 printer driver, the hard disk capacity for fonts and forms has been exceeded. Delete unneeded forms or fonts registered in the machine. The hard disk became full while using the error job store function to store Normal Print jobs as Hold Print files. Delete unneeded files stored in the machine. Alternatively, reduce the data size of the Temporary Print file and/or the Stored Print file. An input buffer overflow occurred. • In [Printer Features], under [Host Interface], select [I/O Buffer], and then set the maximum buffer size to a larger value. • Reduce the number of files being sent to the machine. 207