Ricoh C210SF User Guide - Page 155
Putting paper in the lower tray unit, Memory Unit Type C (64/128/256 MB), Installing additional memory
UPC - 026649025310
View all Ricoh C210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Chapter D Putting paper in the lower tray unit After you have installed the lower paper tray, you can put paper in it the same way you put paper in the upper paper tray. Prohibit Do not put transparencies, labels or envelopes in the paper tray of the optional lower tray unit. This might cause paper jams. Memory Unit Type C (64/128/256 MB) The memory board is installed on the main controller board inside the machine. When you add the optional memory board, it increases the performance for both copy and print operations. The machine has 64 MB of standard memory and a slot for optional additional memory. The memory can be expanded by installing an optional memory (Memory Unit Type C (64/128/256 MB)). You can expand the memory up to a total of 576 MB by installing memory modules. The 512 MB memory module is not supplied by us. When you expand the total memory capacity to 576 MB, install the following type of memory module. Module Type: SO-DIMM (Small Outline Dual-in-line Memory Module) Memory Type: SDRAM (Synchronous Dynamic RAM) Number of Pins: 144 pins CAS latency: 2 or 3 Clock frequency: 100 MHz or more Installing additional memory 1 Turn off the machine's power switch. 2 Unplug first the telephone line cord from the telephone wall jack, and then unplug the power cord from the AC power outlet. CAUTION Make sure you turn the machine OFF and unplug the machine before you install or remove the SO-DIMM. Installing optional accessories without unplugging the machine could result in electric shock hazard. D - 3