Ricoh C220S User Guide - Page 250
X600 1Bit, Resolu, PDL Settings
UPC - 026649061264
View all Ricoh C220S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 250 highlights
Troubleshooting Message Causes Solutions Lower Misfeed Jam Paper has been jammed in the Remove the jammed paper. machine. See p.222 "Removing Printing Jams". Memory Full 1.TX 2.Cancel Memory has reached capacity while scanning originals when trying to send a fax in Memory Transmission mode. Press {1} to send only the pages that have been scanned in memory, or press {2} to cancel. Memory overflow The data is too large or complex to print. Select [600X600 1Bit] in [Resolution] under [PDL Settings] to reduce the size of data. See p.196 "PDL Settings". Misinstall Toner X The print cartridge has not Reinstall the print cartridge. been installed or has not been See p.246 "Replacing Print installed correctly. Cartridges". Misinstallation Waste Toner The waste toner bottle has Box been installed incorrectly. Reinstall the waste toner bottle. See p.251 "Replacing the Waste Toner Bottle". Near End X Toner The print cartridge is almost Prepare a new print cartridge. empty. Near End Waste Toner Box The waste toner bottle is almost full. Prepare a new waste toner bottle. Near Memory Full Memory has almost reached If several originals are still to capacity during sort copy. be scanned, it is recommend- ed to start printing now, and copy the remaining originals separately. If originals are be- ing scanned from the ADF, re- move any remaining pages from the ADF. 9 Net Communication Error Connection with the server Contact the network adminis- Press Clear Key was lost while sending or re- trator. ceiving data. NetBIOS Name Conflicted Press Clear Key The NetBIOS name specified for the machine is already in use by another device on the network. Change the NetBIOS name. See p.210 "Configuring Network Setup". Network device error The machine's network con- Contact your sales or service nection hardware is not func- representative. tioning correctly. Network Is Not Ready Press Clear Key A scanned file could not be sent because the machine has not received IP address information from the DHCP server completely. Wait until the machine receives the IP address information completely, and then try the operation again. 242