Ricoh C811DN Software User Guide - Page 239

Remote Maintenance by telnet The following explains how to configure a IPv6 address to 2001:DB8::100 with prefix length 64 on the Ethernet interface. msh> ifconfig ether inet6 2001:DB8::100 64 Netmask configuration msh> ifconfig "interface_name" netmask "address" The following explains how to configure a subnet mask 255.255.255.0 on Ethernet interface. msh> ifconfig ether netmask 255.255.255.0 Broadcast address configuration msh> ifconfig "interface_name" broadcast "address" Changing the Interface msh> ifconfig "interface" up You can specify either the Ethernet interface or IEEE 802.11b interface when using the optional IEEE 802.11b interface unit is installed. • To get the above addresses, contact your administrator. 6 • Use the default configuration if you cannot obtain setting addresses. • The IP address, subnet mask and broadcast address are the same as that for the ethernet interface and IEEE 802.11b interface. • TCP/IP configuration is the same for both Ethernet and IEEE 802.11 interface. If interfaces are changed, the new interface inherits the configuration. • Use "0x" as the initial two letters of a hexadecimal address. info Use the "info" command to display printer information such as paper tray, output tray, and printer language. Printer information display msh> info • For details about displayed contents, see p.260 "Getting Printer Information over the Network" . ipp Use the "ipp" command to view and configure IPP settings. 237