Ricoh C811DN Software User Guide - Page 287
Name registration success. WINS Server=<WINS
![]() |
UPC - 026649028182
View all Ricoh C811DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 287 highlights
Message List Message Problem and solutions Login to fileserver (,) in the NDS or BINDERY mode. Memory allocate error. Data cannot be obtained. Disconnect the USB cable, and then connect it. Name registration success. WINS Server= Name registration success in Broadcast name= Name registration by Broadcast name of was successful. Name registration failed. name= Name registration of failed. Change to different NetBIOS name. nbtd start. nprinter start (Netware) The nbtd service has started. (In the remote printer mode) The NetWare service 6 has started. nwstart start. (NetWare) The service for NetWare protocol stack setting has started. Open log file (In the print server mode) The specified log file has been opened. phy release file open failed. Replacing the network interface board is required. Contact your sales or service representative. Print queue cannot be serviced (In the print server mode) The print queue cannot by printer 0, be established. Make sure that print queue exists on the specified file server. Print server has no printer. (In the print server mode) The printer is not assigned to the print server. Using NWadmin, assign the printer, and then restart it. print session full No more print jobs can be accepted. Printer has no queue (In the print server mode) The print queue is not assigned to the printer. Using NWadmin, assign the print queue to the printer, and then restart it. 285
![](/manual_guide/products/ricoh-c811dn-software-user-guide-6871a03/287.png)