Ricoh C811DN Software User Guide - Page 286
Interface interface name: Duplicate IP Address IP, Established SPX Connection with PServer
![]() |
UPC - 026649028182
View all Ricoh C811DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 286 highlights
6. Monitoring and Configuring the Printer Message Problem and solutions Duplicate IP=(from). The same IP address (IPv4, or IPv6 address) was used. Each IP address (IPv4, or IPv6 address) must be unique. Check the address of the device indicated in [MAC address]. Established SPX Connection with PServer, (In the remote printer mode) Connection to the print (RPSocket=, connID=) exiting The lpd service has ended and the system is exiting the process. Exit pserver (In the print server mode) The print server function is disabled because the necessary print server settings have not been made. Frametype = 6 httpd start. The frame type name is configured to be used on NetWare. The httpd service has started. IEEE 802.11b mode Displays IEEE 802.11b communication mode. inetd start. The inetd service has started. Interface (interface name): Duplicate IP Address (IP The same IP (IPv4 or IPv6) address was used. Each address). IP address must be unique. Check the address of the device indicated in [IP address]. < Interface > started with IP: < IP address > IP address (IPv4, or IPv4 address) has been set for the interface and is operating. < Interface >: Subnet overlap. The same IP address (IPv4, or IPv6 address) and the subnet mask is used with other device. IPP cancel-job: permission denied. The printer could not authenticate the name of the user attempting to cancel a job. IPP job canceled. jobid=%d. The spooled job was canceled due to error or user request. LeaseTime=(sec), RenewTime=(sec). The resource lease time received from the DHCP server is displayed in [lease time] in seconds. The renewal time is displayed in [renew time] in seconds. 284
![](/manual_guide/products/ricoh-c811dn-software-user-guide-6871a03/286.png)