Ricoh MP 3053 Manuals - Page 58
System Settings, Connecting the Machine/ System Settings., Standard Operation Panel
View all Ricoh MP 3053 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
2. Getting Started 5. Press the program number you want to register. 6. Enter the program name. 7. Press [OK]. 8. Press [Exit]. • The number of characters you can enter for a program name varies depending on the functions as follows: • Copier: 34 characters • Document Server: 34 characters • Facsimile: 20 characters • Scanner: 34 characters • When a specified program is registered as the default, its values become the default settings, which are displayed without pressing the [Program] key, when modes are cleared or reset, and after the machine is turned on. See "Changing the Default Functions of the Initial Screen (When Using the Standard Operation Panel)", Convenient Functions. • When the paper tray you specified in a program is empty and if there is more than one paper tray with the same size paper in it, the paper tray prioritized under [Paper Tray Priority: Copier] or [Paper Tray Priority: Facsimile] in the [Tray Paper Settings] tab will be selected first. For details, see "System Settings", Connecting the Machine/ System Settings. • Destinations that are registered in the machine's Address Book can be registered to a program of the scanner mode. • Destinations can be registered to a program of the scanner mode only when [Include Destinations] is selected for [Program Setting for Destinations] in [Scanner Features]. For details about the setting, see "General Settings", Scan. • Folder destinations that have protection codes cannot be registered to a program of the scanner mode. • Programs are not deleted by turning the power off or by pressing the [Reset] key unless the program is deleted or overwritten. 56