Ricoh MP 3055 User Guide - Page 89
Placing Originals on the Exposure Glass (mainly North America), Lift the ADF.
View all Ricoh MP 3055 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Placing Originals • Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged. 1. Lift the ADF or the exposure glass cover. Be sure to lift the ADF or the exposure glass cover by more than 30 degrees. Otherwise, the size of the original might not be detected correctly. 2. Place the original face down on the exposure glass. The original should be aligned to the rear left corner. Start with the first page to be scanned. 1 DCG030 1. Positioning mark 3. Lower the ADF or the exposure glass cover. Placing Originals on the Exposure Glass (mainly North America) • Keep your hands away from the hinges and exposure glass when lowering the ADF. Not doing so may result in an injury if your hands or fingers are pinched. • Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged. 1. Lift the ADF. Be sure to lift the ADF by more than 30 degrees. Otherwise, the size of the original might not be detected correctly. 2. Place the original face down on the exposure glass. The original should be aligned to the rear left corner. Start with the first page to be scanned. 87