Ricoh MP 4055 Driver Installation Guide - Page 43
If USB Connection Fails, Open Windows' Device Manager
View all Ricoh MP 4055 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
If USB Connection Fails If USB Connection Fails This section describes how to troubleshoot a problem related to USB connections. Problem The machine is not automatically recognized. The machine does not recognize the USB connection even when a USB cable is inserted. The machine does not recognize the USB connection even when a USB cable is inserted. Causes Solutions The USB cable is not connected properly. Disconnect the USB cable from the computer, and then turn off the main power switch. Turn on the main power switch again. When the machine has fully booted up, reconnect the USB cable. Windows has already configured the USB settings. Check whether the computer has identified the machine as an unsupported device. Open Windows' Device Manager, and then, under [Universal Serial Bus controllers], remove any conflicting devices. Conflicting devices have a [!] or [?] icon by them. Take care not to accidentally remove required devices. For details, see Windows Help. If the USB cable is connected while the machine is off, the machine might not recognize the USB connection. Press the operation switch, and then disconnect the USB cable from the computer. When the machine has returned to the ready condition, reconnect the USB cable. 41