Ricoh P C200W Printer Languages and Interfaces Technical Reference - Page 25
PCL emulation commands by function raster graphics, Raster Resolution, Raster Graphics Presentation
View all Ricoh P C200W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Printer Control Language (PCL) emulation 25 PCL emulation commands by function (raster graphics) Command / Parameters Function / Result ESC*t#R 75-75 dpi 100-100 dpi 150-150 dpi 200-200 dpi 300-300 dpi 600-600 dpi 1200-1200 dpi Raster Resolution Note: 200 dpi is only supported when the printer is operating in 600 dpi or 1200 dpi mode. ESC*r#F 0-Rotate with print 3-Fixed (default) Raster Graphics Presentation Sets the raster image orientation in relation to the logical page. ESC*r#S Where: # = number of input pixels. Raster Width (Source) Sets the width of the clip window for raster graphics. ESC*r#T Where: # = number of raster lines. Raster Height (Source) Sets the height of the clip window for raster graphics. ESC*r#A 0-Left Graphics Margin at 0 (Default) 1-Current Cursor Position 2-At logical left page limit with scaling On 3-At current cursor position with scaling On Start Raster Graphics Sets the left margin for raster graphics. ESC*b#V[data] Where: # = number of data bytes. Transfer Raster Data by Plane Use this command when the raster data is encoded by plane as specified by the Simple Color command or the Configure Image Data command. The command sends each plane in the row except the last. ESC*b#Y Where: # = number of raster lines. Y Offset Moves the cursor position down by the specified number of raster lines.