Ricoh SP4100N Software User Guide - Page 251

Message List Message Problem and solutions add_sess_IPv6: community already defined. The same community name already exists. Use another community name. add_sess_IPX: bad trapcommunity The IPX address (00:00:00:00:00:00) is unavailable when the community access type is TRAP. Specify the host IPX address for the TRAP destination. add_sess_IPX: community already defined. The same community name already exists. Use another community name. Attach FileServer= Connection to the file server as the nearest server has been established. Attach to print queue (In the print server mode) Attached to the print queue. Authentication mode mismatch< SSID > Authentication mode is different to the AP. The required SSID is the SSID of the access point 6 connected to when in infrastructure mode. centrod is disabled. Communication via parallel connections unavailable because centrod is disabled in the security mode. Enable centrod in the security mode. Cannot create service connection (In the remote printer mode) Connection to the file server has not been established. The number of file server users may have exceeded the maximum capacity of the file server. Cannot find rprinter (/) server does not exist. Make sure that the printer number is registered on the print server. Change IP address from DHCP Server. The IP address changes when DHCP lease is renewed. To always assign the same IP address, set a static IP address to the DHCP server. child process exec error! (process name) The network service failed to start. Turn the printer off and then on. If this does not work, contact your service or sales representative. 249