Ricoh SP4100N Software User Guide - Page 268

7. Using a Printer Server 6. Click [Logout]. Setting Up as a Remote Printer (NetWare 4.x, 5/5.1, 6/6.5) Follow the procedure below to use the printer as a remote printer under NetWare 4.x, 5/5.1 and 6. • To use the printer as a remote printer under NetWare 4.x/5/5.1, set it to NDS mode. • Do not use the printer as a remote printer when Pure IP is used. Setting up using NWadmin 1. From Windows, start NWadmin. For details about NWadmin, see the NetWare manuals. 2. Set up the network connection to a print queue. Select the object in which the print queue is located in the directory tree, and then click [Create] on the [Object] menu. 3. In the [Class of new object] box, click [Print Queue], and then click [OK]. 4. In the [Print Queue Name] box, enter the name of the print queue. 5. In the [Print Queue Volume] box, click [Browse]. 7 6. In the [Available objects] box, click the volume in which the print queue is created, and then click [OK]. 7. Check the settings, and then click [Create]. 8. Set up the network connection to a printer. Select the object in which the printer is located, and then click [Create] on the [Object] menu. 9. In the [Class of new object] box, click [Printer], and then click [OK]. For NetWare 5, click [Printer (Non NDPS)]. 10. In the [Printer name] box, enter the printer name 11. Select the [Define additional properties] check box, and then click [Create]. 12. Assign print queues to the created printer. Click [Assignments], and then click [Add] in the [Assignments] area. 13. In the [Available objects] box, click the queue you created, and then click [OK]. 14. Click [Configuration], click [Parallel] in the [Printer type] list, and then click [Communication]. 15. Click [Manual load] in the [Communication type] area, and then click [OK]. Check the settings, and then click [OK]. 16. Set up the network connection to a print server. Select a context specified using NIB Setup Tool, and then click [Create] on the [Object] menu. 266