Ridgid R3202 Owners Manual - Page 10

FEATURES KNOW YOUR Circular SAW See Figure 1. The safe use of this product requires an understanding of the information on the product and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. Dust Chute To direct saw dust and chips away from the operator, a dust chute is located on the side of the upper blade guard. Ergonomic Design The design provides comfort when operating in different positions and at different angles. FULL LENGTH KERF INDICATOR Indicates blade position for more accurate cutting. ILLUMINATED PLUG This saw is equipped with a plug that illuminates when power is supplied to the tool. This allows the operator to easily identify live tools. blade wrench STORAGE Blade wrench storage is located on saw housing below the cord exit. The storage area can be accessed by adjusting the saw to a bevel position. Power Cord The 12-foot cord has a built-in cord wrap. SPINDLE LOCK The spindle lock allows you to secure the blade when turning the blade screw. ASSEMBLY UNPACKING This product requires assembly.  Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.  Inspect the product carefully to make sure no breakage or damage occurred during shipping.  Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.  If any parts are damaged or missing, please call 1-866-539-1710 for assistance. PACKING LIST 7-1/4 in. Circular Saw Blade 6 mm Blade Wrench Operator's Manual WARNING: If any parts are damaged or missing, do not operate this product until the parts are replaced. Failure to heed this warning could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury. WARNING: 7-1/4 in. blade is the maximum blade capacity of the saw. Also, never use a blade that is too thick to allow outer blade washer to engage with the flat on the spindle. Larger blades will come in contact with the blade guides, while thicker blades will prevent blade screw from securing blade on spindle. Either of these situations could result in a serious accident. CAUTION: To prevent damage to the spindle or spindle lock, always allow motor to come to a complete stop before engaging spindle lock. 10