Ridgid R86008K Owners Manual - Page 6

FEATURES PRODUCT SPECIFICATIONS Chuck 1/2 in. Keyless Motor 18 Volt DC Switch VSR (Variable Speed Reversible) No Load Speed 0-450/0-1,650 r/min. (RPM) Clutch 24 Position Torque with 1.5 Ah Li-ion battery R840085.535 in.lb. (60.45 Nm) with 3.0 Ah Li-ion battery R840083...500 in.lb. (55.9 Nm) KNOW YOUR DRILL See Figure 1, page 13. The safe use of this product requires an understanding of the information on the product and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. BELT HOOK The belt hook can be used to hang the tool from a belt when disconnected and not in use. BIT STORAGE The bit provided with the drill can be placed in the storage area, located on the base of the drill. DIRECTION OF ROTATION SELECTOR (FORWARD/REVERSE/CENTER LOCK) Your drill has a direction of rotation (forward/reverse/center lock) selector located above the switch trigger for changing the direction of bit rotation. Setting the direction of rotation selector in the OFF (center lock) position will lock the switch trigger to help reduce the possibility of accidental starting when not in use. KEYLESS CHUCK The keyless chuck allows you to hand-tighten or release the drill bit in the chuck jaws. LED GRIP LIGHT The LED grip light, located on the front of the tool base, illuminates when either the switch trigger or grip light switch is depressed. TORQUE ADJUSTMENT RING Your drill has a 24-position clutch. The torque adjustment ring can be turned to select the right amount of torque for your application. TWO-SPEED GEAR TRAIN The two-speed gear train is designed for drilling or driving at LO (1) or HI (2) speeds. A slide switch is located on top of your drill for selecting either LO (1) or HI (2) speed. VARIABLE SPEED SWITCH The variable speed switch trigger delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure. CALIFORNIA PROPOSITION 65 WARNING: This product and some dust created by power sanding, sawing, grinding, drilling, and other construction activities may contain chemicals, including lead, known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands after handling. Some examples of these chemicals are: • lead from lead-based paints, • crystalline silica from bricks and cement and other masonry products and, • arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. 6 - English