Ridgid R92009 Owners Manual - Page 6
Features, Assembly - parts
View all Ridgid R92009 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
FEATURES PRODUCT SPECIFICATIONS Chuck 3/8 in. Keyless Motor 12 Volt DC Switch VSR (Variable Speed/Reversible) KNOW YOUR DRILL See Figure 1, page 12. The safe use of this product requires an understanding of the information on the product and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. DIRECTION OF ROTATION SELECTOR (FORWARD/REVERSE/CENTER LOCK) Your drill has a direction of rotation (forward/reverse/center lock) selector located above the switch trigger for changing the direction of bit rotation. Setting the direction of rotation selector in the OFF (center lock) position will lock the switch trigger to help reduce the possibility of accidental starting when not in use. KEYLESS CHUCK The keyless chuck allows you to hand-tighten or release the drill bit in the chuck jaws. No Load Speed 0-350 / 0-1500 r/min. (RPM) Clutch 18 Position Torque 300 in.lb. LED LIGHT The LED light, located under the chuck, illuminates when the switch trigger is depressed. This provides extra light for increased visibility. LOW BATTERY INDICATOR If the LED light flashes during operation, this indicates a low battery charge condition and signals that the battery should be recharged soon. TORQUE ADJUSTMENT RING Your drill has an 18-position clutch. The torque adjustment ring can be turned to select the right amount of torque for your application. TWO-SPEED GEAR TRAIN The two-speed gear train is designed for drilling or driving at LO (1) or HI (2) speeds. A slide switch is located on top of your drill for selecting either LO (1) or HI (2) speed. VARIABLE SPEED The variable speed switch trigger delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure. ASSEMBLY UNPACKING This product has been shipped completely assembled. Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled could result in serious personal injury. Inspect the product carefully to make sure no breakage or damage occurred during shipping. WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. If any parts are damaged or missing, please call 1-866-539-1710 for assistance. PACKING LIST Drill WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the product when assembling parts. Bit Operator's Manual 6 - English